found mine... its a 318i...but w/ a euro m3 engine a body kit
"You are bidding on a BMW E36 318i currently undergoing EURO M3 ENGINE SWAP. I purchased an used euro M3 engine pulled out from 97 E36 M3 which had approximately 28000mile until parting out and has been installing it to my 1992 E36 318i. All work has been done in a professional BMW mechanic shop.
Here is the list of works done on the car so far;
(1) Labor: Remove 318i Motor and Install M3 Motor
(2) Labor: Connector/sensors/wiring transfer
(3) Labor: Additional Labor For Euro M3 swap
(4) Euro 3.2 Motor
(5) Passenger Side Motor Mount Bracket
(6) Motor Mounts
(7) Right Side Radiator Mount
(8) Upper & Lower Radiator Hoses
(9) T/O Bearing
(10) Euro Overflow Tank
(11) Euro Overflow Tank to water pump supply hose
(12) Pentosin Blue(coolant)
(13) Water
(14) Misc Hardware(6mm/8mm bolts, washers, nuts, etc)
(15) Kendall GT1 20W-50 Engine Oil
(16) OX68D Oil Filter Kit
(17) Large Hose Clamps
(18) Small Hose Clamps
(19) BMW High-pressure power steering line
(20) Bulk 12mm Power steering line
(21) Kendall ATF Dexron II
(22) D&W Racing Steering Wheel
(23) ///M Gear Shift Knob
(24) Euro Clear Brake Lamps
(25) Euro Clear Signal Lamps
(26) Euro Angel-Eye Head Lights
(27) ///M Side Molding Kits (Not Installed Yet) <$100 value>
(28) E36 Carbon Fiber Engine Hood (Not Installed Yet) <$500 value>
(29) Custom Full Body Kit (Not Installed Yet) <$500 value>
Here is the list of parts and labor to be done to complete the project.
(1) Euro HFM
(2) EWS Key
(3) EWS O-ring
(4) EWS Ring Antenna
(5) EWS Lock Assembly
(6) EWS Wiring Harness for ignition lock system
(7) Euro Instrument Cluster
(8) Labor
The project needs to exchange EWS system with Euro M3 ones, as you can see, and it is going to cost you approximately $1,500~$2,000. I have done this project for almost an year, but I don't need the project any longer. Over $10,000 has been spent on this project!!!! My loss is your gain!!!"
and i still ahve $5000 to spend
..