Go Back   Sports Car Forum - MotorWorld.net > General Discussion > General Chat
Reload this Page Who has actually paid for porn on the web?
Become a Supporting Member         Become a Preferred Vendor

General Chat General chat about anything that doesn't fit in another section here



Reply
Page 1 of 2 1 2
 
Thread Tools Display Modes
Old 10-06-2003, 04:57 PM   #1
Tuan Le
Regular User
 
Join Date: Aug 2003
Posts: 51
Default Who has actually paid for porn on the web?
With free sites all over the web, I am curious if anyone here has actually put out money for other paid sites. However, I do agree that more than often than not, paid sites have better content.
__________________


2000 Corvette 6Spd. MTI 408 Iron Block Stroker, built specifically for nitrous.
Goodies include 6.0L iron block (4.30 bore), Lunati 4" forged crank & billet rods, custom Wiseco nitrous pistons, C&A rings, Clevite bearings, ARP head studs, Cometic head gaskets, SLP double roller timing chain, Jesel shaft-mounted rocker arms, McCleod dual disk clutch, Corsa Indy exhausts, VaraRam Intake and much more.
NA Dyno = 450rwhp/457rwtq
Nitrous Dyno 100-shot = 556rwhp/631rwtq
Nitrous Dyno 250-shot = Classified. :p
Tuan Le is offline   Reply With Quote
Old 10-06-2003, 05:00 PM   #2
Jabba
Regular User
 
Join Date: Jun 2003
Location: Near London, United Kingdom
Posts: 5,815
Default
I would like to add your link to the front page...if thats still ok Tuan Le ???
Jabba is offline   Reply With Quote
Old 10-06-2003, 05:01 PM   #3
TT
Regular User
 
Join Date: Jun 2003
Location: Lugano, Switzerland
Posts: 23,178
Default
Yep, I paid for some months for a couple of sites
__________________
TT is offline   Reply With Quote
Old 10-06-2003, 05:03 PM   #4
Tuan Le
Regular User
 
Join Date: Aug 2003
Posts: 51
Default
Originally Posted by Jabba
I would like to add your link to the front page...if thats still ok Tuan Le ???
Sure... Thanks Jabbas.
__________________


2000 Corvette 6Spd. MTI 408 Iron Block Stroker, built specifically for nitrous.
Goodies include 6.0L iron block (4.30 bore), Lunati 4" forged crank & billet rods, custom Wiseco nitrous pistons, C&A rings, Clevite bearings, ARP head studs, Cometic head gaskets, SLP double roller timing chain, Jesel shaft-mounted rocker arms, McCleod dual disk clutch, Corsa Indy exhausts, VaraRam Intake and much more.
NA Dyno = 450rwhp/457rwtq
Nitrous Dyno 100-shot = 556rwhp/631rwtq
Nitrous Dyno 250-shot = Classified. :p
Tuan Le is offline   Reply With Quote
Old 10-06-2003, 05:04 PM   #5
Tuan Le
Regular User
 
Join Date: Aug 2003
Posts: 51
Default
Originally Posted by TT
Yep, I paid for some months for a couple of sites
Wanna trade? I have access to Playboy Cyber Club.
__________________


2000 Corvette 6Spd. MTI 408 Iron Block Stroker, built specifically for nitrous.
Goodies include 6.0L iron block (4.30 bore), Lunati 4" forged crank & billet rods, custom Wiseco nitrous pistons, C&A rings, Clevite bearings, ARP head studs, Cometic head gaskets, SLP double roller timing chain, Jesel shaft-mounted rocker arms, McCleod dual disk clutch, Corsa Indy exhausts, VaraRam Intake and much more.
NA Dyno = 450rwhp/457rwtq
Nitrous Dyno 100-shot = 556rwhp/631rwtq
Nitrous Dyno 250-shot = Classified. :p
Tuan Le is offline   Reply With Quote
Old 10-06-2003, 05:11 PM   #6
TT
Regular User
 
Join Date: Jun 2003
Location: Lugano, Switzerland
Posts: 23,178
Default
Originally Posted by Tuan Le
Originally Posted by TT
Yep, I paid for some months for a couple of sites
Wanna trade? I have access to Playboy Cyber Club.
LOL I have no more access to them
__________________
TT is offline   Reply With Quote
Old 10-06-2003, 05:17 PM   #7
Wide
Regular User
 
Join Date: Jun 2003
Location: Ankara, Turkey
Posts: 558
Default
Share it with us dude...
Wide is offline   Reply With Quote
Old 10-06-2003, 05:19 PM   #8
Tuan Le
Regular User
 
Join Date: Aug 2003
Posts: 51
Default
Here, to all the Jabbasworld members. Enjoy!!!!

http://www.carbabeforum.com/forum/showthread.php?t=666
__________________


2000 Corvette 6Spd. MTI 408 Iron Block Stroker, built specifically for nitrous.
Goodies include 6.0L iron block (4.30 bore), Lunati 4" forged crank & billet rods, custom Wiseco nitrous pistons, C&A rings, Clevite bearings, ARP head studs, Cometic head gaskets, SLP double roller timing chain, Jesel shaft-mounted rocker arms, McCleod dual disk clutch, Corsa Indy exhausts, VaraRam Intake and much more.
NA Dyno = 450rwhp/457rwtq
Nitrous Dyno 100-shot = 556rwhp/631rwtq
Nitrous Dyno 250-shot = Classified. :p
Tuan Le is offline   Reply With Quote
Old 10-06-2003, 06:12 PM   #9
TT
Regular User
 
Join Date: Jun 2003
Location: Lugano, Switzerland
Posts: 23,178
Default
Originally Posted by Tuan Le
Here, to all the Jabbasworld members. Enjoy!!!!

http://www.carbabeforum.com/forum/showthread.php?t=666
I tried but no luck.. normal?
__________________
TT is offline   Reply With Quote
Old 10-07-2003, 07:11 AM   #10
SDK2003
Regular User
 
Join Date: Jun 2003
Location: Solihull - UK
Posts: 502
Default
I have a standard Adult Check ID which allows access to quite a few sites

I have enough Pr0n already though 8)
__________________


|| Canon 20D x2 | 17-40L | 24-70L | 100 USM Macro | 100-400L IS | 580EX ||
SDK2003 is offline   Reply With Quote
Old 10-07-2003, 10:33 AM   #11
Tuan Le
Regular User
 
Join Date: Aug 2003
Posts: 51
Default
Originally Posted by TT
Originally Posted by Tuan Le
Here, to all the Jabbasworld members. Enjoy!!!!

http://www.carbabeforum.com/forum/showthread.php?t=666
I tried but no luck.. normal?
Did you read the entire post? Try out few different accounts listed in there.
__________________


2000 Corvette 6Spd. MTI 408 Iron Block Stroker, built specifically for nitrous.
Goodies include 6.0L iron block (4.30 bore), Lunati 4" forged crank & billet rods, custom Wiseco nitrous pistons, C&A rings, Clevite bearings, ARP head studs, Cometic head gaskets, SLP double roller timing chain, Jesel shaft-mounted rocker arms, McCleod dual disk clutch, Corsa Indy exhausts, VaraRam Intake and much more.
NA Dyno = 450rwhp/457rwtq
Nitrous Dyno 100-shot = 556rwhp/631rwtq
Nitrous Dyno 250-shot = Classified. :p
Tuan Le is offline   Reply With Quote
Old 10-07-2003, 02:45 PM   #12
oic0
Regular User
 
Join Date: Jul 2003
Location: Louisiana
Posts: 76
Default
One word...... Kazaa
oic0 is offline   Reply With Quote
Old 10-07-2003, 03:53 PM   #13
TT
Regular User
 
Join Date: Jun 2003
Location: Lugano, Switzerland
Posts: 23,178
Default
Originally Posted by Tuan Le
Originally Posted by TT
Originally Posted by Tuan Le
Here, to all the Jabbasworld members. Enjoy!!!!

http://www.carbabeforum.com/forum/showthread.php?t=666
I tried but no luck.. normal?
Did you read the entire post? Try out few different accounts listed in there.
Tried every single one and nothing.. no idea what's wrong, but no big deal dude
__________________
TT is offline   Reply With Quote
Old 10-07-2003, 03:54 PM   #14
SDK2003
Regular User
 
Join Date: Jun 2003
Location: Solihull - UK
Posts: 502
Default
Originally Posted by oic0
One word...... Kazaa
yup




__________________


|| Canon 20D x2 | 17-40L | 24-70L | 100 USM Macro | 100-400L IS | 580EX ||
SDK2003 is offline   Reply With Quote
Old 10-07-2003, 04:08 PM   #15
Wide
Regular User
 
Join Date: Jun 2003
Location: Ankara, Turkey
Posts: 558
Default
33,741 files.. Too much dude..!!!
Wide is offline   Reply With Quote
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump