motor

Erez · 08-17-2005, 04:43 PM

can you show me a pic with good results on speedfan.. cause my room is very hot as it is and i really need cooling solutions.. and i'm sure the results i have now are bad.. so i would like to see whats a normal result...

pharzo · 08-17-2005, 04:48 PM

Well hard drives typically run around 30C, my p4 runs at 55C,and my case temp is 25C

And yeah for a pretty thorough stress test run Super PI for 32MB

Erez · 08-17-2005, 04:58 PM

all i get is temp1 temp2 temp3 and HD0.. whats what? (temp1 is 39C temp2 is marked by fire.. 54C temp3 ia -48C (?) and HD0 is also marked by fire with 53C)

pharzo · 08-17-2005, 05:17 PM

temp1 is most likely your case temp. That's pretty hot...

Temp2 is your processor, don't worry about the fire. You can change when it appears. For your processor its safe until about 78C

You can just turn off temp3 as there's no sensor there

HD0 is your hard drive temp, and 53C is also quite hot. What HD do you have?

Erez · 08-17-2005, 05:56 PM

WD 120GB SATA ( C: ) and WD 60GB , but i found the prob i have 2 HDD.. and they were one over the other, i gave them some room now and added a fan in front of them.. i'm running a test now (32MB) and the temp1 is 49C temp2 is 62C and temp3 is 39C..

Erez · 08-17-2005, 06:32 PM

the test is done... max temps were t1- 54C t2- 65C and t3- 46C
here are the results (w\o OC)-

edit- so basicly if a 32MB test is done with no errors then its stale? what about max temp for the processor? above what temp its a bad result?

Erez · 08-19-2005, 04:45 AM

no answer?
i now OC it to 3.6 (20%) and it ran Super PI fine (32MB in 38m 40sec) but at audio compress in 3dmark the temp goes up to 68C or something and the pc just gets stucks.. what does it mean? should i down the OC to 10%? or could i solve ithis little prob?

@3.6-

Erez · 08-20-2005, 09:18 AM

sorry for the post whoring.. but no one answers me..
i OCed it to 10% it works at 3.3GHz.. but the results at Super PI are actually worse then 3.0.. (32MB in 42m 25sec) what does that mean? could anyone please help me to understand whats going on and what should i do.. pretty please?

Erez · 08-20-2005, 12:35 PM

all i did was to select overclock 10%.. i didnt play with any other option (dont even know how..)

i now tried some cooling idea that i had and ran it with 20% (3.6GHz) and turbo (?) finished the Super Pi with max 62C@CPU

now i'll see if i can finish a PCMark05 test and how is next to 3.3 and 3.0.. last time @3.6 the PC got jammed..

Edit- finished the PCMark05 test, max CPU temp was 65C..

stock the result was 3151..
any ideas about the results? any tips on cooling? and how can i OC without presettings like i use now of 5,10,20,30 %... ? thanks!

Erez · 08-21-2005, 10:39 AM

yeah.. i noticed.. btw- my sis said she might be going by train to belgium next week (or something like that..) but that she doesnt have that much cash on her.. just on a credit card... i'll let you know if she'll go and if she cant find it in france.. so let me know whats the best deal around you area.. and maybe she'll drop by..

any tip on cooling.. i want good cooling for my pc.. and all the once that i liked cost shit load of money.. is fan cooling any good? or must i go to like water cooling etc..

Erez · 08-21-2005, 12:11 PM

any way it would be a 'yes' go?

anyway could you let me know in what price can you find it?

Erez · 08-22-2005, 01:03 PM

EU? that the lowest price around? not as cheap as i hoped...

Erez · 08-22-2005, 02:46 PM

this sucks.. i hate taxes more then anything else.. it like the gov way to rob you!!