Go Back   Sports Car Forum - MotorWorld.net > Automotive Brands Forum > Car Chat



Reply
 
Thread Tools Display Modes
Old 09-23-2006, 11:27 AM   #1
pagani
Regular User
 
Join Date: Jun 2003
Location: Pagani Productions HQ
Posts: 6,237
Default The new race car of roger clark motor sport

The base shell is a subaru impreza type r 2 door competion lightweight japan only version this was the last generation of he classic impreza model.
And this is the best prepared subaru i have ever maby even better than
Engine is good for 850 hp and it's has nitrous setup that can be adjusted to add 35 hp or add max 400 hp.
The weight is 1120 kg.
Max topspeed over 200 mph
0-60 2,5 seconds.
The full spec

Body
WRC steel arches WRC front and rear bumpers
WRC carbon rear spoiler
FIA T45 multi point welded in roll cage
STi alloy bonnet with RCMS heat extraction vents and gas struts
Heated front screen
WRC non heated lightweight rear screen
Engine
2.0Litre closed deck subaru block
RCMS extreme arrow rods
RCMS 75mm steel crankshaft
RCMS omega flat top pistons (coated) compression ratio 9.5:1
V4 STi cylinder heads with WRC/RCMS O-ring head gaskets and gas rings
One piece Nimonic exhaust valves
One piece stainless inlet valves
RCMS uprated valve springs
Plasma nitrided titanium spring caps
WRC main and big end bearings
WRC R-Profile high wrap cam belt system
RCMS modified oil pump to suit R-Profile belt
WRC S10 inlet manifold
RCMS eight injector kit
RCMS 72mm throttle body
RCMS 5.5 litre alloy sump
WRC short runner exhaust manifold
Garret GT 35-40 turbo with speed sensor
K&N air filter with RCMS 100mm inlet trumpet
RCMS high flow intercooler with twin tube core
70mm stainless steel intercooler pipe work
Electronics
M800 Motec ECU with traction control,nitrous control,anti-lag
paddle shift control,and full engine management control and data login
Motec dash with data login
Defi gauges for turbo,oil,fuel pressure
Interior
FIA carbon kevlar recaro seats
FIA sabelt 6-point harness
Transmission
R180 STi rear axle 3.9:1 cwp and plated modena LSD differential
GKN rally drive shafts front and rear
Torque line carbon fibre propshaft
Six speed subaru gearbox casing modified for sequential housing
Six speed modena gear kit
Subaru 3.9:1 front cwp
RCMS sequential system
RCMS paddle shift system
Plated centre diff with 1:1 uprated output modena gears
Plated front modena differential
Fuel System
FIA spec 26 litre rubber/kevlar bag tank in aluminium cover
Twin bosch fuel pumps (200 litre per pump)
-8 Goodrich fuel feed pipe
-6 Goodrich fuel return pipe
-6 fuel cooler with cooling fan on return
RCMS 8 injector distribution block
2x SX fuel regulators running at 4 bar static pressure
Suspension
WRC spec exe-tc fully ajustable dampers
High and low speed bump + rebound ajustment
STi Rose jointed rear lateral links
STi Rose jointed rear trailing links
Exe-tc bottom rose jointed upright bushes
STi alloy front arms (polished)
STi quick-steer steering rack
WRC roller bearing single piece steering column
Momo suede steering wheel
Nitrous
NX full wet system
121bs carbon bottle with heater jacket
High flow shark nozzle
Motec auto control or driver manual system
Ajustable from +35bhp to +400bhp
Clutch
RCMS spec triple plate alloy cover OS GIKEN clutch and flywheel
RCMS hydraulic light pressure system
Quick release dry brake fluid connection
Brakes
AP 355mm six pot front (track and road use)
AP 304mm four pot front (drag strip use)
AP 290mm four pot rear with floating discs
RCMS hydraulic carbon handbrake
-3 stainless steel goodrich pipe work and fittings
Wheels
Road/Track use 19x8 forged alloy 1 piece rims
Drag strip use 15x8 spun alloy 3








http://forums.nasioc.com/forums/show....php?t=1023928
http://www.rogerclarkmotorsport.co.u...fld_graphicRef
pagani is offline   Reply With Quote
Old 09-23-2006, 11:32 AM   #2
RC45
Regular User
 
Join Date: Jun 2003
Location: Texas
Posts: 15,413
Default

What's the total cost for such a car?
RC45 is offline   Reply With Quote
Old 09-23-2006, 11:38 AM   #3
pagani
Regular User
 
Join Date: Jun 2003
Location: Pagani Productions HQ
Posts: 6,237
Default

I think the cost will be at least 100000 english pound this car build witout any shortcuts and zero comfort.
Just they way such car of this type schould be build.
pagani is offline   Reply With Quote
Old 09-23-2006, 11:41 AM   #4
RC45
Regular User
 
Join Date: Jun 2003
Location: Texas
Posts: 15,413
Default

Hmmm.. for $200,000 would it be any quicker than an M3 racer ? - Which can be had for about $75K with spares
RC45 is offline   Reply With Quote
Old 09-23-2006, 11:42 AM   #5
LotusGT1
Regular User
 
Join Date: Jan 2004
Location: The Netherlands
Posts: 1,565
Default

I think I can outperform this for £100k 8)
__________________
LotusGT1 is offline   Reply With Quote
Old 09-23-2006, 12:08 PM   #6
pagani
Regular User
 
Join Date: Jun 2003
Location: Pagani Productions HQ
Posts: 6,237
Default

The 100000 pound is just a guess maby more maby less.
Let's say i would be very expensive to build a car to this very high spec.
pagani is offline   Reply With Quote
Old 09-25-2006, 02:43 PM   #7
dutchmasterflex
Regular User
 
Join Date: Jul 2003
Posts: 4,566
Default

Wow. that looks like a lot of fun.

Sure its pricey, but I can see this running laps around a "race prepped M3".. until tires melt off..
__________________
dutchmasterflex is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump