Go Back   Sports Car Forum - MotorWorld.net > General Discussion > Under Construction

Under Construction Post up your build threads here.



Reply
 
Thread Tools Display Modes
Old 10-14-2014, 07:30 AM   #1
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default Skyline R33 GTST

Here it is, my new daily driver: Skyline R33 GTST S1 2.5T '93 with 120000km on the clock. Phase 1 tuning with 320hp and a few other goodies.

One pic for starters, because I just got home from a two day trip. Car is from Germany, near the border with France (~1000km in one way).


To be continued...
'talla
peruccy is offline   Reply With Quote
Old 10-16-2014, 03:19 PM   #2
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default

Current plans for the car:
- Preventive replacement of conrod and main bearings + major service
- Cleaned out engine bay
- GTR look
- Coilovers (Tein or D2)
- 19" rims

Forgot to mention, that the car has central locking, a/c and electric windows + mirrors. And the best part of it is... it all WORKS! After so many years - you just gotta love the Japs Oh, and it also has an alarm fitted. And front strut bar. HICAS which also works. Bilstein suspension. The previous owner has also given me blitz blow off, blitz electronic boost controller and greddy turbo timer. And a set of 18" rims. All in all, quite a few additional trinkets...

18" rims left in the picture:


Today I've put it on a ramp for the first time to see whatswhat. There is no rust. Not even on the chassis. Oil sump is dry as pepper. That is very important. It has a few things to sort out, like a cracked steering boot, worn rear brake discs, fmic not mounted properly exc. But what gets my blood boiling, an engine bay which looks ugly like a pig. It doesn't take much, to make an engine bay look clean and nice. Don't know why the previous owner hasn't done anything about that...

Gtr look will look nice with this fmic


Engine bay will get a clean look, and all the hoses replaced with black silicone ones - even for the fmic


As for the interior... I need to repaint the driver side window operating switch, because the plastic has become squiggly - common problem with alfa's actually I will also buy a gtr central console for three gauges, because current ones don't look nice. And I'll have to replace the shift knob and boot also


But apart from that, the car looks very solid for it's age...

Next update when first parts arrive
'talla
peruccy is offline   Reply With Quote
Old 10-19-2014, 02:12 PM   #3
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default

Today I've fitted those 18" that I've got with the car. Personally I think they look better than those Porsche 17". Those will go on the 166, when I get an adapter


In any case, Alfa has a bigger one (5" vs. 4.5")


'talla
peruccy is offline   Reply With Quote
Old 11-08-2014, 06:25 AM   #4
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default

Parts are slowly arriving, so it's time I put some pics on here...

GTST S2 MAF




Because interior is a bit sad/left out, I've decided I will treat Sky with some nice items. First one is a Nismo shift knob




Previous owner has had three gauges mounted in the dash, but it looks terrible. So I've ordered an alloy gauge holder which fits R33 perfectly. It will be painted mat black, once I receive the lower part and center part of the dash from a GTR


Gear stick and handbrake gaiters were tattered. Leather replacements


I'm missing a passenger's floor mat. OEM used ones are too expensive, so I got an aftermarket set


ARP conrod bolt set has arrived. I'm still waiting on ARP main bolt set. I've also got a magnetic oil drain plug


ACL trimetal race bearings


Blitz turbo timer and Blitz electronic boost controller


Blitz Super BOV


Parts for the alternator and starter rebuild. I'm still waiting on a voltage regulator for the alternator, and starter motor solenoid. Then I will have all the parts for the rebuild. Reason for doing this is, there's a 95% chance they are still original parts, and after 21 years, it would be nice to rebuild them. I also got a gasket for the Nismo oil pump, which I am still waiting for...


Silicone radiator hose set. I still need to order a breather set, and replace blue FMIC coupling hoses with black ones


Piece de resistance is Bee-R rev limiter In plain English, it's a bang-bang flamethrower - because I'm 5 years old


To be continued...
'talla
peruccy is offline   Reply With Quote
Old 11-13-2014, 06:04 PM   #5
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default

Some new parts...

Because my current pedals are side mounted for drifting, and because they are insanely wide - I can press two pedals with my size 12 foot with ease, I have decided to change them. I went for Sparco of course. I wanted something that looks "normal" and is slim as possible


I have also got a translator for my fuse box. Japanese is not my strong suit


For lower system pressure I have got a Nismo radiator cap


Previous owner has removed A/C, so the car would be faster. If a car has A/C, I want it to work. So I had to buy a pulley for it. Of course it is only OEM, and I got a quote at my local Nissan dealership for 275$. I got it from the States for 65$


I have also received a GTR lower dashboard trim and a few other bits. Dashboard trim is painted, so it doesn't get sticky like on my car. All the parts will be painted in matte black of course


And ARP main bolt kit, which was quite pricey...


To be continued,
'talla
peruccy is offline   Reply With Quote
Old 11-25-2014, 06:40 PM   #6
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default

Some new parts have arrived...

Rear diff seal


Rear hub bolt, because one has damaged threads


Starter motor pinion & alternator brush set


A few more silicone hoses


Lightweight alloy pulley set


Braided stainless steel fuel hose + clamps + adapters for an universal 30 micron fuel filter (at home)


Nismo GTR oil pump


Nismo oil filler cap + two crankshaft plates


Top end gasket set


to be continued...
'talla
peruccy is offline   Reply With Quote
Old 11-29-2014, 06:35 PM   #7
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default

Adapter for MAF for universal air filter


OEM cam belt


Nismo GTR water pump


OEM tensioners + spring + seals


OEM gear + bolt for harmonic balancer


Now most of the parts have arrived. I am only waiting for thermostat to arrive from Japan, and two gauges. Liquids, spark plugs and filter I will get in our store. Then I will only need a wideband oxygen sensor, stainless steel exhaust manifold, 3" decat downpipe and fuel pump, and that's it for tuning parts for this year. Then next year I will get coilovers & wheels and then bankruptcy

'talla
peruccy is offline   Reply With Quote
Old 12-02-2014, 03:18 PM   #8
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default

Digital gauges for boost & oil temperature


'talla
peruccy is offline   Reply With Quote
Old 12-06-2014, 08:27 AM   #9
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default

I have finally received Nismo thermostat from Japan. It opens 10°C sooner than stock


I have also received the final parts for the interior... cover under the windscreen, because my current one has a broken clip and is lifted


And surround for the gear lever. This one goes with the upper cover I bought before. It is also only painted in matte black, so there will be no more rubber-ish plastic feel


Clips for the cover under the windscreen + seal for the prop shaft + gasket for the brake booster


I have also found that you can order a set of gaskets for the power steering pump. I had to have it, because I can see some oil around the housing




'talla
peruccy is offline   Reply With Quote
Old 12-08-2014, 03:37 PM   #10
johnnny
Regular User
 
Join Date: Oct 2007
Posts: 16
Default

So the creation of the monster is beginning? Nice car! How tricky do you find it to drive with a steering wheel on the wrong side?
johnnny is offline   Reply With Quote
Old 12-08-2014, 05:18 PM   #11
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default

I wouldn't say monster... 400rwkw is the goal. And yes, it has begun. Just a few items on my list this year, and a few more for the next year. Then I start saving money for some properly expensive mods

Not at all difficult. The thing I found the most annoying compared to LHD, was the indicator stalk. It has it on the right side of the steering wheel. That was a bugger to getting used to RHD steering wheel and shifting with the left I got used to in a few km's of driving...
peruccy is offline   Reply With Quote
Old 12-19-2014, 05:29 PM   #12
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default

X-mas came early


Second hand Blitz turbo timer will be replaced by a new HKS one


Seal under the plastic cover under the windscreen

'talla
peruccy is offline   Reply With Quote
Old 12-19-2014, 06:58 PM   #13
Shaggy
Administrator
 
Shaggy's Avatar
 
Join Date: Aug 2008
Location: Arizona
Age: 48
Posts: 95
Default

This is cool.
Shaggy is offline   Reply With Quote
Old 01-01-2015, 12:55 PM   #14
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default

Thanks!

Some new parts...
Nismo emblem for the front and back


Silicone turbo inlet pipe


Oxygen sensor


'talla
peruccy is offline   Reply With Quote
Old 01-05-2015, 02:26 PM   #15
peruccy
Regular User
 
peruccy's Avatar
 
Join Date: Dec 2007
Posts: 46
Default

Last package of silicone hoses... now every hose around the engine will be 4ply silicone


'talla
peruccy is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump