View Single Post
Old 02-04-2008, 05:38 PM   #7
pagani
Regular User
 
Join Date: Jun 2003
Location: Pagani Productions HQ
Posts: 6,237
Cool

Originally Posted by crazyxzer0 View Post
Best time I ran my current setup is 13.1@103mph. I had a ok 60ft of 1.8xx and bad reaction time as it was my first time out on slicks. Turbo seals are now leaking and I'm planning to get a new better turbo . Best thing I love is this thing still gets 29mpg at the moment even with the leaky turbo.

here is the video of the run..not the best but its it..

http://www.youtube.com/watch?v=P7nnlrcq5Dc



and some pics to go with it.



boost spike made it unreadable at that spot.. i would say i have 228whp 200tq.










as of january 08 this is my mod list..

Mod List as of 1/25/2008
Engine Specifications:
  • Wiseco 75.5mm 8.5:1 CR Forged Pistons
  • Eagle Forged Rods
  • ACL Bearings
  • Supertech Valvetrain
  • OEM Rebuild
  • Spoolinperformance A/C D series Manifold
  • Spoolinperformance Dumptube
  • Spoolinperformance 2.5" Downpipe w/ flexpipe
  • Spoolinperformance Oil line kit
  • Spoolinperformance Oilpan tapp
  • Garrett T3 Super60 .42/.48 68trim
  • Tial 38mm Wastegate
  • Streamline FMIC Piping
  • Drag FMIC
  • ATPturbo.com Couplers/Tboltclamps
  • Greddy Type S BOV
  • Fastturbo.com Vacuum Manifold
  • TunerToys 550cc Injectors
  • AEM FPR
  • GM MSD 3BAR map sensor
  • Walbro 255lph Fuel Pump
  • ARP Headstuds
  • Cometic Headgasket
  • Magnacore 10mm Ignition Wires
  • Blox Oil Sandwich Adapter
  • Greddy Type S Electronic Boost controller
  • ACT Heavy Duty Pressure Plate
  • ACT OEM street Disc
  • ACT Streetlite Flywheel
Exhaust:
  • Golden Auto Mufflers 2.5" Testpipe
  • Golden Auto Mandrel 2.5" Exhaust Downpipe-back
  • Spoon N1 Coupe Muffler
Suspension, wheels & tires:
  • APEXi N1 99spec ITR coilovers
  • OEM Integra Front Crossmember Brace
  • OEM ITR Rear LCAs
  • OEM ITR Rear Sway Bar
  • OEM ITR Rear Trunk brace
  • Comptech Tie Bar
  • Cusco Type OS Front Strut Bar
  • Cusco Type OS Rear Strut Bar
  • Energy Suspension Front Poly Endlinks
  • OEM 15/16th Master Cylinder
  • OEM 4040 Proportioning Valve
  • Brembo Crossdrilled Front Rotors
  • Brembo Blank Rear Rotors
  • Techna-fit SS Lines
  • Hawk HPS Pads
  • Intermilano RG6 rims
  • OEM 1995 Integra GSR 'Fat Fives' rims
  • Weds Sports TC05 rims
Interior:
  • OEM Optional Audio Console
  • OEM Optional Armrest
  • Autometer Sport Comp II Oil Temp, Pressure, and Boost
  • Carbon Fiber 3Gauge DIN panel
  • OEM JDM ITR Black shift boot
  • OEM JDM ITR Black Recaros
  • Skunk2 Shiftknob
  • Skunk2 Shortshifter
  • NRG Slim Hub
  • NRG Quick Release V2
  • NRG Quick Release Lock
  • Personal Neo Grinta 350mm Black/Red Stitching
Exterior:
  • OEM JDM Stanley Corners
  • OEM JDM Stanley Sidemarkers
  • OEM JDM "Coupe" Emblem
  • OEM Moonroof Visor
  • OEM Mudflaps
  • Weathertech Window Visors
  • Denji Projectors w/ TSX retrofits
  • 35% Tint
Good to see honda properly modified
Nice ride.


Last edited by pagani; 02-04-2008 at 05:46 PM.
pagani is offline   Reply With Quote