Ferrari F355TT @ Drags
 

http://www.fullboost.com.au/content/...4_12_355tt.avi

Ferrari 355 with Twin Turbo.

Calder street meet in Oz on the 17th this month.
11.3
They were saying it will be doing 10's by the new year :D

oh this must be the one I was reading about on FerrariChat.....sounds interesting. :D
If I remember correctly its been modded by Nizpro and has about 540rwhp :shock:

EDIT: I just found where I read about it, and if its the same one then it has 450kW at the rear wheels :shock: It still sounds pretty nice IMO, and must be awesome to drive around. :)

Thanks for the video, loved it. :D

wow, thank you for the video, but the sound isn't so nice imo, especially not against the stock sounds of the F355, but it's very fast...

ya but how long will that car last lol

Here is some more info on the upgrades:

Two Packages are offered as follows:

1) 575flywheel hp (355kW) at wheels (6-psi boost)

· Pre-programmed MoTeC ECU M800 with plug in loom adaptors (can be upgraded to include traction control, Lambda, logging and so forth).
· MoTeC loom and associated fuses.
· High-flow 4-spray fuel injectors.
· 2 x High-flow Garret GT roller bearing turbochargers.
· 45mm Turbosmart wastegate.
· 2 x custom high volume tube and fin intercoolers with cast tanks.
· Thermatic fans on each intercooler with On temperature of 28c and 22c Off via MoTeC switching.
· Custom large volume Air Cleaner box with low restriction K&N filter element mounted under bonnet vent and associated tubing, cast in aluminium in either polished or powder coated finish depending on customer’s requirements.
· Turbocharger exhaust manifolds 3mm stainless steel or cast (depending on application (depending on catalytic converter).
· Same with cast stainless steel wastegate plumbing.
· 2 x Cast aluminium pipe from inlet manifold to intercooler pipes.
· 4 x 76mm rubber ‘hump’ hoses (intercooler/inlet).
· 6 x 76mm silicon rubber hoses (turbocharger to intercooler and turbo to air cleaner plumbing).
· 20 x stainless steel hose clamps.
· 2 x aluminium weld on dash-10 sump fittings for turbo drain back hoses (depending on quantity we will cast a higher volume CNC machined sump with integral drain back holes).
· 2 x braided stainless steel turbo drain back hoses.
· 2 x braided stainless steel turbo feed hoses.
· 4 x braided stainless steel water feed and return hoses.
· All copper washers, banjo bolts, T-pieces, gaskets and hose clamps to suit above.
· High-flow dual inlet and twin outlet 3-inch in and out stainless steel muffler.
· CNC laser cut turbo-mounting bracket.

Indicative current buying price: AU$42,000 + shipping and insurance.

2) 650hp and 400 rwkw (9.5 psi boost)

As above plus:

· High volume package.
· Modified programming.
· Modified wastegate.
· High volume fuel pump.

Indicative current buying price: AU$47,000 + shipping and insurance.

Damn fast and quite a lot of mods. But I prefer the sound of the standard f355, although a nice aftermarket exhaust system is allowed ;)

That's pretty awesome! Have to say it's not my idea of tuning to a 355, it's an interesting alternative to go drag racing with.

Very impressive but what about reliability ??? :P

That's crazy :shock: ... Thnx for the vid dude :D