Got my Enzo
 

My brother got this enzo and it is finally finished! it is a TB-01 i think and looks pretty goo and goes like hell. It is 4 wheel drive through and is shaft driven. It has oil dampered suspension, limited slip dif and is very red.

http://www.jabbasworld.net/photopost/data/2/73rear.jpg

http://www.jabbasworld.net/photopost/data/2/73side.jpg

http://www.jabbasworld.net/photopost/data/2/73front.jpg

http://www.jabbasworld.net/photopost/data/2/73top.jpg

very well done nice paintjob I would tint the windows though.

mm i dont mind the windows like that i like the back one, even though there is no V12 in teh window is nice eing there.

very cool, any chance of some vids? what are thos 4 black posts for? how much did it cost? i was thinking for gettins something similar this summer

the black posts hold the case on you can sut em but that mean if you want another one it may not fit. Vids yes maybe i will see what i can do. It was worth about $500 AUS

woh.. how fast can it do 0-60.... inches that is..

i wouldnt have a clue. Its electric i think it tops out at about 40km/h

its mine

If you could get videos of this that would be pretty humorous and worthwhile. I think a lot of people would like that. Imagine setting up some books and ramps. A replica of Laguna Seca on your kitchen floor using office supplies. Eh...maybe not.

you cant use this inside unless your inside is a basket ball court.

It's very nice indeed, but how big is it? Why don't you put a pen or your hand near the car? Then we could have an idea of the car size.
________
Vaporizer affiliates

its full size :wink: :wink: i will find out hold on

red indeed...

nice electric, here's my Nitro:
http://www.acurainspired.com/gallery...277_p22229.jpg

This is really the only Ferrari Enzo that I can buy myself. :D

the scale is 1/10 i think thats the normal size

nice for how quick does your nitro do?

it's geared to do 72mph... it will get to 60 in under 3 seconds.

whoow :D that's about as fast as my lightly tuned moped haha nice job!

I have an electric Scooby! :D

Where can you order this or buy it? it is very well done

my guess is it's this:
http://www2.towerhobbies.com/cgi-bin...?&I=LXDLV3&P=7

but this is also a fun little toy... little smaller:
http://www2.towerhobbies.com/cgi-bin...I=LXEWU2**&P=7

http://www.freepixhosting.com/uploadedfiles/diablo.jpg
http://www.freepixhosting.com/upload...che%20Body.jpg
http://www.freepixhosting.com/upload...een%20body.jpg


Wanna race??

i have a nitro t-maxx but i havent taken it out in a long time becuas eof carburator problems.
what car is under the body? what brand?

HPI RS4

The saleen looks so nice

yeah some nice shells you got there. I would i like a pertrol one day. How hard are they to look after should you only buy a good one

Yeah, I want to get a nitromethanol one too, they're hella fast. I've driven a few of them at one point in time or another, they're fun as heck.

any pics of the inside?

you want pics of the guts, yeah i will get em to ya soon i am atad busy.

Looks serious!

very purty, ne chance on getting some body off shots?

next time I'm home...though I have to warn you, I kluged together a good portion of the internals from older cars, so it looks pretty bad...as a result, I can make it fwd, rwd or 4wd.

hehehe
I have a eletric Ferrari F355

really nice !! once i was into rc cars but got tired, i had really no time... its really fun but i prefer collecting the scale ones

can someone tell me how much it cost in US$ cause i have no idea how much is 500$AUS lol It looks pretty fun, i'd like to take it on the highway! :wink:

374 USD :D .. just type "currency converter" in google next time, don't be lazy ;) or just bookmark http://www.xe.com/ ;)

Here are a few pics of mine, no pics of the Nitro Monster Truck though.

HPI Micro RS4 and a Traxxas Emaxx

http://home.comcast.net/~jeffgundry/...1/site1058.JPG
http://home.comcast.net/~jeffgundry/...1/site1059.JPG
http://home.comcast.net/~jeffgundry/...1/site1060.JPG
http://home.comcast.net/~jeffgundry/...1/site1065.JPG
http://home.comcast.net/~jeffgundry/...1/site1067.JPG
http://home.comcast.net/~jeffgundry/...1/site1068.JPG
http://home.comcast.net/~jeffgundry/...1/site1069.JPG

BTW, they are both for sale if anyone is interested! :D

why does everyone say nice paint job on rc cars? you paint the inside and not the outside, so obviously it would look nice

but very nice. check out on hooby link japan to see if they have add on bits to make it look realistic. possibly a V12 add on hahaha.

i know they have it for plastic kits like photoetched brakes and real mesh but you could try for rc cars

i love that, thats so wicked... must of been hard to make it urself

very nice paint job

lucky you ....at least you have enzo ... :wink:

its prilly kewl .......

i think tinting the windows wood be a good idea ..