Sports Car Forum - MotorWorld.net

Sports Car Forum - MotorWorld.net (http://www.motorworld.net/forum/index.php)
-   Computers, Consoles, Gadgets And Gizmos (http://www.motorworld.net/forum/forumdisplay.php?f=22)
-   -   help!! how do i play a PAL dvd in usa (http://www.motorworld.net/forum/showthread.php?t=12818)

skituner 07-12-2004 12:38 PM

help!! how do i play a PAL dvd in usa
 
i just got back from england where i bought Clarkson Shootout
im dying to watch it but of course i forgot the fact that it is PAL so i doesent work in my dvd player
are there anyways that i could watch it???

*btw i got tons of pics of england. ill post them as soon as i can

T-Bird 07-12-2004 12:43 PM

well you can watch it on your computer without any trouble at all otherwise you have to get a PAL DVD player and TV good luck with the later.

PATo355 07-12-2004 01:19 PM

Im told that you can rip the DVD change the format to NTSC and burn it into dvd , is that right?

T-Bird 07-12-2004 01:21 PM

yeah but you have to get the proper software to convert it which you will probably have to pay for, I've tried free ones before and they always disapoint.

DMbaseball1604 07-12-2004 01:25 PM

yeah I've done it with Dr. Divx...and it that works great...but yes you do have to pay for it

No.1 07-12-2004 01:43 PM

Hmmm.... get a a MULTIREGION Player or hack for your model

I live in the UK... PAL.... and play loads of NTSC discs on my PAL TV and multiregion DVD Player.

i am not sure if a PAL dvd would play on an NTSC TV Set :?

Here is a DVD Hack guide... using the remote to set your player's region from 1/2 to Region 0

http://www.videohelp.com/dvdhacks

TT 07-12-2004 01:46 PM

The problem dude is that while here most of our TV set can play both NTSC and PAL vids, we can just hack our DVD players (like I did of course). In the US their TV can't read the PAL signal even if the player can play it

No.1 07-12-2004 01:48 PM

^^^
I thought that may have been the problem. :roll: :wink:

That's shit then :?

I suppose playing on your PC (maybe using a card with TV-Out) is the only viable solution :D

T-Bird 07-12-2004 01:56 PM

or using one of those new 30" displays from Mac :wink:

No.1 07-12-2004 01:58 PM

^^^

Hmm... £2500 :shock: ... the Ultimate computer screen :twisted:

SFDMALEX 07-12-2004 02:29 PM

Yes a PAL DVD can be played on an NTSC TV. "PAL" DVDs just has a slightly higher resolution, but it can still be played. Dont forget that its all MPEG 2 anyway.

One solution would be to get an xbox, chip it, and install a multi region DVD player in it. :D

Second would be to watch on your TV through your computers TV-OUT.

T-Bird 07-12-2004 03:43 PM

Quote:

Originally Posted by thenumber1
^^^

Hmm... £2500 :shock: ... the Ultimate computer screen :twisted:

And the best part is you have to have a special video card to view the damn thing because of the pixel count :twisted:

Quote:

Originally Posted by Apple Store
Dual Link DVI
The 30-inch Cinema HD Display* requires the next level of DVI connectivity — dual link to drive the massive amount of pixels to the screen. And the NVIDIA GeForce 6800 Ultra DDL graphics card delivers, with the most advanced graphics engine available. This card, designed specifically to support the dual link DVI connection, delivers 2560 by 1600 resolution. Even better, it can drive two 30-inch Apple Cinema HD Displays*, giving you the ultimate creative canvas.


skituner 07-12-2004 03:58 PM

what about ps2
do think that i would work??

No.1 07-12-2004 04:03 PM

Quote:

Originally Posted by T-Bird
Quote:

Originally Posted by thenumber1
^^^

Hmm... £2500 :shock: ... the Ultimate computer screen :twisted:

And the best part is you have to have a special video card to view the damn thing because of the pixel count :twisted:

And... to work with a PC requires an adapter... £50+ :P

T-Bird 07-12-2004 04:04 PM

nope same deal with the PS2 ask TT he has both versions

No.1 07-12-2004 04:05 PM

Quote:

Originally Posted by skituner
what about ps2
do think that i would work??

If you install DVD Region X on it... get it from www.play.com ... go to the USA site.

Also try getting a DVD hack from the site i posted above... the hacks only work on less expensive players, not Sony's etc... :wink:

Maybe buy a DivX Player from amazon.com :idea:

T-Bird 07-12-2004 04:05 PM

Quote:

Originally Posted by thenumber1
Quote:

Originally Posted by T-Bird
Quote:

Originally Posted by thenumber1
^^^

Hmm... £2500 :shock: ... the Ultimate computer screen :twisted:

And the best part is you have to have a special video card to view the damn thing because of the pixel count :twisted:

And... to work with a PC requires an adapter... £50+ :P

I have one somewhere around here it's not that extravagent but they still charge a bitch load for it, I got mine for free. 8)

No.1 07-12-2004 04:09 PM

What is it that you run... a PC with which monito and card :?:

T-Bird 07-12-2004 04:16 PM

Quote:

Originally Posted by thenumber1
Quote:

Originally Posted by skituner
what about ps2
do think that i would work??

If you install DVD Region X on it... get it from www.play.com ... go to the USA site.

Also try getting a DVD hack from the site i posted above... the hacks only work on less expensive players, not Sony's etc... :wink:

Maybe buy a DivX Player from amazon.com :idea:

Still wont work it has to be NTSC format BOT PAL
check the manufacturers website: http://us.codejunkies.com/shop/product.asp?c=US&cr=USD&cs=$&r=0&l=1&ProdID=3

you have to understand that PAL and NTSC don't just go between eachother in the US you can't use PAL equipment together

T-Bird 07-12-2004 04:20 PM

Quote:

Originally Posted by thenumber1
What is it that you run... a PC with which monito and card :?:

I just have a 20" sony Trinitron since LCD's suck for Gaming and I have the room for it. I have an ATI 9600 Pro for Graphics card but for some reason when I got the monitor it came with one of those adapters that go both ways PC-to-Mac and vise versa it's in a drawer somewhere I don't use the thing.

Jabba 07-12-2004 04:20 PM

I am sure there are much better ways with better software but with the old software I know this is how I would do it.

Smart Ripper to rip the DVD into vobs

DVD2AVI load the vobs into this and save as a d2v project.

TMPEG load the d2v project into this and select the NTSC DVD template after encoding you should end up with an NTSC MPEG2 compatible file.

Spruce Up (or any one of the many authoring programes) load your MPEG2 file into this and make some menu screens if you like.

Burn to a DVD-R to make your NTSC shoot out DVD.

I might give it a go later to see if it will work. If you have a DVD burner I could even upload the image file for you to burn your own disc directly without having to go through any of the above.

Jabba 07-12-2004 04:22 PM

Just as a note there is a frame rate difference between NTSC and PAL so the audio will need to be re-synced as well.

T-Bird 07-12-2004 04:22 PM

you want to go through all that though Jabba?

Jabba 07-12-2004 04:26 PM

Well I do like a challenge..plus I have done NTSC to PAL before for people that didnt have a NTSC equipped TV....it doesnt take long on my PC now either.

T-Bird 07-12-2004 04:30 PM

that's true but are you still on 56k? that might pose a problem uploading the iso

Jabba 07-12-2004 04:32 PM

Well I am sure that you noticed that I uploaded over 1 gig last night.

T-Bird 07-12-2004 04:34 PM

that's true didn't think about that since I don't have access anyway but then why are you still using that nick?
BTW does it have mod privileges aswell?

No.1 07-12-2004 04:42 PM

Quote:

Originally Posted by lamboman
Just as a note there is a frame rate difference between NTSC and PAL so the audio will need to be re-synced as well.

True... films run shorter in the US than in the UK... or is it the otherway around :? .... exactly the same film, just slightly different speeds... wierd.

BTW - As lamboman you are 43 years old, yet as Jabba you are 33... so come on, which is it :P

You don't have to tell me... a lot of 40+ people i konow don't like to disclose their age :wink: (joking, i really do understand that some people may find this offensive... i am just fucking around :D )

Jabba 07-12-2004 04:43 PM

I use this nick when I am on 56K and Jabba when I am at the office on ADSL.

No.1 07-12-2004 04:44 PM

^^ BUt what about the age thing :?:


Tell me to fuck off if you want...

T-Bird 07-12-2004 04:45 PM

well I think Lamboman was supposed to be hidden at first.

Jabba 07-12-2004 04:54 PM

The age thing was to test the birthday mod (you get a pop us message on your birthday) lamboman was also a female once...I guess it should have been lambowoman in that case.

No.1 07-12-2004 05:22 PM

^^^^
:lol:

I was only wondering :D

abbor 07-12-2004 06:24 PM

Search for the prog DVD-Shrink... With that, you can shrink the dvd and burn it as a region free dvd... Go to www.digital-digest.com and there are also progz that make you able to watch every region on your computer...

Jabba 07-13-2004 05:00 AM

It wasnt a region issue that was the problem...the problem was that the DVD is in PAL and the TV will only accept an NTSC signal.

AlienDB7 07-13-2004 05:26 AM

Quite a number of DVD player nowadays can convert PAL signal to NTSC output. The two chinese players (APEX and AMV) I tried support that. My Apex isn't region unlocked but most newer ones can be hacked easily. Do some research online and grab one of those cheap *made in china* players. They play literally anything you throw at it, even mpg's on data cd.


All times are GMT -4. The time now is 04:03 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.