View Full Version : 850 hp chevrolet corvette c5 zo6
pagani
09-21-2008, 12:20 PM
Rc 45 will your corvette be anything like this?
850HP ZO6 Corvette Great Video - YouTube
:-):thumbup:
No - that car is nothing like my car. That is just another procharged car. I chose to NOT go that route with my car for the simple reason an aftermarket blown car does not lend itself to thrashing around a road course in the Texas heat.
Its that simple.
There are probably 50 Procharged C5 Vettes in Houston all with 700 to 1000rwhp - and not a single one can lap a road course in the summer heat without pulling timing and threatening to die - they are all like big HP Supras... they are only good for freeway rollons.
dutchmasterflex
09-21-2008, 01:04 PM
Nice to see a high powered Vette sliding around
5vz-fe
09-21-2008, 02:03 PM
What RC said, but it looked like a nicely done Vette.
I esp like how the exhaust is done.
pagani
09-21-2008, 03:08 PM
No - that car is nothing like my car. That is just another procharged car. I chose to NOT go that route with my car for the simple reason an aftermarket blown car does not lend itself to thrashing around a road course in the Texas heat.
Its that simple.
There are probably 50 Procharged C5 Vettes in Houston all with 700 to 1000rwhp - and not a single one can lap a road course in the summer heat without pulling timing and threatening to die - they are all like big HP Supras... they are only good for freeway rollons.
What route will you go then?
Big cubic inch?
nthfinity
09-21-2008, 03:15 PM
What route will you go then?
Big cubic inch?
Eventually, I think RC will go with Kinsler, or Harrop and also have to get a new hood to fit the new throttle bodies. That will yield some more power. However, I think he is satisfied with his power as-is, and looking for the best track session killer that he can drive to and from the track; hence his new splitter, ductail, and forthcoming park bench :)
What route will you go then?
Big cubic inch?
Well, so far he's gone with cubic inches, a big cam, and some compression. I'm guessing more of the same, but I'm sure RC will chime in. There are always more things to be addressed . . . sigh, so much to do to my on car.
Svensson
09-22-2008, 10:04 AM
I also believe ITB's are the way to go. Besides more power and torque, they also give better throttle response and a deep growling induction roar. What more can you wish for!
Here you can see the Harrop setup:
http://i14.tinypic.com/6txw3tv.jpg
Sounds something like this:
http://www.harrop.com.au/site_resources/668/616/video_file/harrop_hurricane_manifold.mpg
pagani
09-22-2008, 12:03 PM
Well, so far he's gone with cubic inches, a big cam, and some compression. I'm guessing more of the same, but I'm sure RC will chime in. There are always more things to be addressed . . . sigh, so much to do to my on car.
I mean more than 8 litre
I mean more than 8 litre
427ci is 7 litres. 500ci just to pursue a power number is better left to the Jay Leno's of the world (The $50,000+ cost of a 500ci LSx based motor is just out of regular folks leagues) - and the return on the ITB's investment is pretty low - especially considering you need a new engine managment solution.
Such motors are really only for the folks who view a $50, $60, $75 or $100,000 motor as an interesting hobby or whom are powertrain managers of million dollar GT1 teams ;)
This is what makes the EVS super charger that MTI Racing in Georgia have put together so interesting.
For around $20K they transform the 427ci motor into a very capable track monster - and not just a "dyno and roll on queen".
pagani
10-01-2008, 04:15 PM
427ci is 7 litres. 500ci just to pursue a power number is better left to the Jay Leno's of the world (The $50,000+ cost of a 500ci LSx based motor is just out of regular folks leagues) - and the return on the ITB's investment is pretty low - especially considering you need a new engine managment solution.
Such motors are really only for the folks who view a $50, $60, $75 or $100,000 motor as an interesting hobby or whom are powertrain managers of million dollar GT1 teams ;)
This is what makes the EVS super charger that MTI Racing in Georgia have put together so interesting.
For around $20K they transform the 427ci motor into a very capable track monster - and not just a "dyno and roll on queen".
So you can still considering a supercharger for more power?
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.