|Nuno|
02-15-2005, 11:47 AM
Here it is. Inspired by the o' mighty Gran Turismo 4 thread, I decided to make a GTR thread as well.
If you feel like it, here's the place to post everything related to GTR. Setups, Screen Shots, guides, your times, useful links, etc...
Ok, so first: Useful Links
http://forum.rscnet.org/ (Scroll down 'till the GTR topic; LOADS of useful stuff).
www.bhmotorsports.com
www.m4driving.it
As you can see, I don't know many, so if you have more just post them. :D
The MoTeC n00b guide
http://forum.rscnet.org/showthread.php?t=188377&page=1
Follow the link. Neat stuff, now I can finally use MoTeC.
MOMO FFB Settings
This is made especially for the Logitech MOMO Black Racing Wheel, so it won't work as well in other Wheels (no shit, Sherlock?!).
The one I use:
FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad.
FFB Effects Level="5" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom.
FFB Gain="0.95000" // Strength of Force Feedback effects. Range 0.0 to 1.0.
FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis.
FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis.
FFB steer vibe freq mult="0.07000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration.
FFB steer vibe zero magnitude="0.03500" // Magnitude of steering vibration at 0mph (reference point).
FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude).
FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB steer force average weight="0.95000" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency.
FFB steer force exponent="0.70000" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity.
FFB steer force input max="-11500.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction).
FFB steer force output max="1.60000" // Maximum force output of steering force, recommendation 0.8 to 2.0
FFB steer force grip weight="0.70000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force.
FFB steer force grip factor="0.60000" // Range 0.0 to 1.0, recommended: 0.2 to 0.6. How much of a factor the front wheel grip is on the steering weight.
FFB steer update thresh="0.0001500000" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate.
FFB steer friction coefficient="0.10000" // Coefficient to use for steering friction. Range: -1.0 to 1.0
FFB steer friction saturation="1.00000" // Saturation value to use for steering friction. Range: 0 - 1.0
FFB steer damper coefficient="0.10000" // Coefficient to use for steering damper. Range: -1.0 to 1.0
FFB steer damper saturation="1.00000" // Saturation value to use for steering damper. Range: 0 - 1.0
FFB throttle vibe freq mult="0.40000" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50
FFB throttle vibe zero magnitude="0.09000" // Magnitude of engine vibration at 0rpm (reference point).
FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude).
FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB throttle vibe update thresh="0.02000" // Amount of change required to update throttle vibe (0.0 - 1.0)
FFB brake vibe freq mult="0.90000" // Scales actual brake rotational frequency to force feedback vibration frequency.
FFB brake vibe zero magnitude="0.09000" // Magnitude of brake vibration at 0mph (reference point).
FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude).
FFB brake vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB brake vibe update thresh="0.02000" // Amount of change required to update brake vibe (0.0 to 1.0)
FFB rumble strip magnitude="0.30000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect.
FFB rumble strip freq mult="0.50000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev.
FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB rumble strip pull factor="-0.60000" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5.
FFB rumble strip update thresh="0.03500" // Amount of change required to update rumble strip effect (0.0 - 1.0)
FFB jolt magnitude="1.30000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0
X axis sensitivity set to 40% and all the axis deadzones at 0%. Speed sensitivity 0% as well.
And the Logitech Profiler Settings:
http://img170.exs.cx/img170/5517/image18am.th.jpg (http://img170.exs.cx/my.php?loc=img170&image=image18am.jpg)
First make a copy of your PLR file. GTR/Userdata/yourname/yourname.PLR
Then copy the settings I posted. Open your PLR, delete the FFB Values (only the ones equal to what you're going to change), and paste the new values. Save the settings, and voilá!
More info about this can be found here:
http://forum.rscnet.org/showthread.php?t=151074&page=1&pp=25
And all the credit goes to Zevious Zoquis, a.k.a. the "MOMO God".
Also, read this:
http://website.lineone.net/~richardn/
A MUST if you want to go faster. The tail braking technique works great. Shaved about a second per lap, depending on the track. :D
It's all for now. I'll post more stuff later, if I have time.
So, GTR dudes, just pop in. :D
If you feel like it, here's the place to post everything related to GTR. Setups, Screen Shots, guides, your times, useful links, etc...
Ok, so first: Useful Links
http://forum.rscnet.org/ (Scroll down 'till the GTR topic; LOADS of useful stuff).
www.bhmotorsports.com
www.m4driving.it
As you can see, I don't know many, so if you have more just post them. :D
The MoTeC n00b guide
http://forum.rscnet.org/showthread.php?t=188377&page=1
Follow the link. Neat stuff, now I can finally use MoTeC.
MOMO FFB Settings
This is made especially for the Logitech MOMO Black Racing Wheel, so it won't work as well in other Wheels (no shit, Sherlock?!).
The one I use:
FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad.
FFB Effects Level="5" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom.
FFB Gain="0.95000" // Strength of Force Feedback effects. Range 0.0 to 1.0.
FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis.
FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis.
FFB steer vibe freq mult="0.07000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration.
FFB steer vibe zero magnitude="0.03500" // Magnitude of steering vibration at 0mph (reference point).
FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude).
FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB steer force average weight="0.95000" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency.
FFB steer force exponent="0.70000" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity.
FFB steer force input max="-11500.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction).
FFB steer force output max="1.60000" // Maximum force output of steering force, recommendation 0.8 to 2.0
FFB steer force grip weight="0.70000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force.
FFB steer force grip factor="0.60000" // Range 0.0 to 1.0, recommended: 0.2 to 0.6. How much of a factor the front wheel grip is on the steering weight.
FFB steer update thresh="0.0001500000" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate.
FFB steer friction coefficient="0.10000" // Coefficient to use for steering friction. Range: -1.0 to 1.0
FFB steer friction saturation="1.00000" // Saturation value to use for steering friction. Range: 0 - 1.0
FFB steer damper coefficient="0.10000" // Coefficient to use for steering damper. Range: -1.0 to 1.0
FFB steer damper saturation="1.00000" // Saturation value to use for steering damper. Range: 0 - 1.0
FFB throttle vibe freq mult="0.40000" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50
FFB throttle vibe zero magnitude="0.09000" // Magnitude of engine vibration at 0rpm (reference point).
FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude).
FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB throttle vibe update thresh="0.02000" // Amount of change required to update throttle vibe (0.0 - 1.0)
FFB brake vibe freq mult="0.90000" // Scales actual brake rotational frequency to force feedback vibration frequency.
FFB brake vibe zero magnitude="0.09000" // Magnitude of brake vibration at 0mph (reference point).
FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude).
FFB brake vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB brake vibe update thresh="0.02000" // Amount of change required to update brake vibe (0.0 to 1.0)
FFB rumble strip magnitude="0.30000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect.
FFB rumble strip freq mult="0.50000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev.
FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB rumble strip pull factor="-0.60000" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5.
FFB rumble strip update thresh="0.03500" // Amount of change required to update rumble strip effect (0.0 - 1.0)
FFB jolt magnitude="1.30000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0
X axis sensitivity set to 40% and all the axis deadzones at 0%. Speed sensitivity 0% as well.
And the Logitech Profiler Settings:
http://img170.exs.cx/img170/5517/image18am.th.jpg (http://img170.exs.cx/my.php?loc=img170&image=image18am.jpg)
First make a copy of your PLR file. GTR/Userdata/yourname/yourname.PLR
Then copy the settings I posted. Open your PLR, delete the FFB Values (only the ones equal to what you're going to change), and paste the new values. Save the settings, and voilá!
More info about this can be found here:
http://forum.rscnet.org/showthread.php?t=151074&page=1&pp=25
And all the credit goes to Zevious Zoquis, a.k.a. the "MOMO God".
Also, read this:
http://website.lineone.net/~richardn/
A MUST if you want to go faster. The tail braking technique works great. Shaved about a second per lap, depending on the track. :D
It's all for now. I'll post more stuff later, if I have time.
So, GTR dudes, just pop in. :D