UPdated. What i will ride ! Restoring it !

[bultaco_metralla]

Hi im Adolfo from Spain, im new on jabbas, very very nice site!!!

TT , Impala is from montesa, from bultaco you have Frontera and Lobito wich are similar to impala, there are lots of bultaco models, you can check it here:

http://217.127.158.230/motoantigua/www/bultaco/MODELOS.html
(sometimes the link is slow)

Ive tryed to reedit last topic but i couldnt hehehehe...
well, I have a BULTACO METRALLA 250 GT, its road not enduro im restoring it so its all in pieces but i think ive taken good photos. The specifications are:

General information

Model: Bultaco Metralla 250 GT
Year: 1976
Category: Sport

Engine and transmission

Displacement: 244.00 ccm (14.89 cubic inches)
Engine type: Single cylinder
Stroke: 2
Power: 23.00 HP (16.8 kW)) @ 7500 RPM
Compression: 10.0:1
Bore x stroke: 72.0 x 60.0 mm (2.8 x 2.4 inches)
Fuel control: Port control
Cooling system: Air
Gearbox: 5-speed
Transmission type final drive: Chain

Physical measures

Weight incl. oil, gas, etc: 130.0 kg (286.6 pounds)

Chassis and dimensions

Front tyre dimensions: 3.25-19
Rear tyre dimensions: 3.50-18
Front brakes: Expanding brake
Rear brakes: Expanding brake

Speed and acceleration

Top speed: 131.0 km/h (81.4 mph)

Other specifications

Fuel capacity: 14.00 litres (3.70 gallons)


Time for pics:

http://img168.exs.cx/img168/3395/19kk.jpg

http://img168.exs.cx/img168/2126/21hr.jpg

The moto would be like this, but mine will be yellow and black instead red and chromeplated

http://img186.exs.cx/img186/9625/142g4bh.jpg

I also have a Hyundai Getz 1.3GLS, 83 BHP... supersport loooool!! well its not a supercar but i really have fun with it as youll see in the second photo...

http://img168.exs.cx/img168/9194/35dw.jpg



I hope you like this photo, this was yesterday with the first snow in madrid, i was going to study but rally fever got me hehehhe...

http://img168.exs.cx/img168/281/getz360nieve4iy.jpg


Ill try talk with a friend, maybe he joins jabbas and you could see his Lancia Delta HF Turbo, his brother had an HF integrale version 1 but he sold it because the turbo broken and many other problems.. but my friend still have the HF turbo hehehe...


Hope you like the topic hehehehe!!!

Adolfo ( spain )

________________________________________________

RISTORATION
________________________________________________


WEEKEND FEB 11-13

Mudguards

Ristoration: 24 hours gasoline bath, then with toilet paper clean "the shit" the gasoline didnt "eat", after that with an aluminium scotch-brite and as soft as you can scratch the oxide, clean again with a cloth and a little of gas to take out small oxide particles. Then clean with water to quit gas and finally apply a polishing cream with cotton. Watch the difference:

http://img63.exs.cx/img63/4767/guardabarros27wm.th.jpg (http://img63.exs.cx/my.php?loc=img63&image=guardabarros27wm.jpg)

http://img76.exs.cx/img76/5530/guardabarros15ee.th.jpg (http://img76.exs.cx/my.php?loc=img76&image=guardabarros15ee.jpg)

(next week cylinder)

[TT]

Dude, you can't imagine how much we appreciate somebody actually following the rules as good as you did :D
Indeed the restoration doesn't seem near the end :P

As for the Getz, nothing wrong about it and the last pic is great!

[TransAm]

can't wait to see the bike finished either!

Welcome to JW 8)

[bultaco_metralla]

THX TT, youre right about time for ristoration hehhehe, at least i have to restore 25% more like air filter, brakes etc... but around summer ill have it finished and youll see pics and maybe a little video so you can hear that spanish 2 stroke sound hehehehe!!!

about the pic, when i came out to take the photo i couldnt believe that the circles were concentric... its almost a perfect 360 ¿drift? ( dont know the word hehehe)

see you here!!

[DeMoN]

Dude, you can't imagine how much we appreciate somebody actually following the rules as good as you did :D
Indeed the restoration doesn't seem near the end :P

As for the Getz, nothing wrong about it and the last pic is great!

I agree, before reading his post, I checked his post count and avatar-less nick. I thought this would be some Shitty post but damn I was wrong.

Nice to see you posting such quality stuff and posting pictures so early.

Dont forget to add an avatar at the Profiles section so people can visually remember you. Its harder to remember by just looking at your nick.

[bultaco_metralla]

i dont know how funny it is cause the moto has been in a garage for 25 years looool it was from my uncle and he decide to give me as a present!! i couldnt believe!!

About 2 storke 250 cc single cylinder you can see the size of the cylinder in the second photo, at the left of helmet, the cylinder its huge!!

[bultaco_metralla]

hehehehehe dont worry Demon, i can understand you thought it was going to be a shitty post, its very stange to see old bultaco motos hehehe,in other way, avatar done, BULTACO LOGO hehehe...

About Lancia Hf, ive already talk with my friend,he will join JW after we finish our examns or we will use my nick to post his car, also will talk with my best friend to see if he wants to show his Kia Sportage 3 doors offroad modified very very beautifull. We usually go for offroad session twice a month!! will send also offroad fotos!!

Brrrm brrrmbrrrm MORE GAS !!!!!

[TT]

...
TT , Impala is from montesa, from bultaco you have Frontera and Lobito wich are similar to impala, there are lots of bultaco models, you can check it here: ...

BTW, wasn't me ;)

[bultaco_metralla]

Lol sorry dude !!! , one question.... how can i send you a video?? i dont have webpage and the next week im going to have an offroad drift session with my getz and im probably going to make a little video, ill edit it with music and presentation etc... no more than 20 mb i suposse...

Thx!!!

In the last reply i forgot to say that we finish exams the february 10, you have to wait a little until HF turbo photos

[TT]

Uhm as for vids it is a bit tricky. We don't offer hosting to "normal" memebers actually, so you need to find somebody with a small webspace willing to help you

[bultaco_metralla]

ok, thx, IT WAS JUST TO SHOW YOU UNTIL I HAVE A WEBPAGE... NO PROBLEM!! ill see what ill do!! at least youll see photos of the drifts and maybe a river cross with the kia hehehehehehe OFFROAD FOREVER!!!

mORE gas!!!

[bultaco_metralla]

Thx a lot man!! im going to post photos as im restoring it !!! Hope you enjoy!!!

[coombsie66]

I must say this topic made me happy in more than one way...... :D

First its great to see a new member.....then its great to see he actually reads the rules....then he posts a interesting topic wich will probably only be more interesting as the resturation progress goes by......and last but not least you sound very extatic and eager....your way of getting across made me smile....thx..... :D

Couldnt agree more! Great to have you aboard bultaco_metralla :D

[bultaco_metralla]

THX a lot, i think that when you are new on a place if you dont read and follow the rules... youre out or going to have bad "karma" with people loooool about karma is a joke heheheh...

If you want, tell me how to update the topic and as im restoring pieces i can post photos and tell how i did it, so we will have a completely restoration hehehehe

its gonna be hard but i think i can post some works on weekend because im studing industrial engineering and dont have many free time during week, so ill work on it on weekends...

"Er Killo de la Metralla"

[Minacious]

bultaco_metralla, I am so impressed with your introduction and the fact that you are restoring a classic bike (I am a sportbike enthusiast myself), that when you have the video ready, get in touch with me, I will host it for you. You might think we are making a big deal out of nothing, but if you saw all the clueless folk that sign up, you'd understand. :D :D

[antonioledesma]

great, an españolete has arrived and comes from Madrid. :D
The moment I saw the post I was thinking the natural: another nooooob with 2 pics of his car and no custom shot. But no, I was wrong :mrgreen:

now, enjoy your stay in JW, we're really have great expectations about you

see you around Adolfo

[bultaco_metralla]

LoL !!! I have to admit that the name of the topic doesnt urges to read it, im sure many people hasnt read it cause they thought this: " oh no, another stupid kiddy with pretensions to have a lambo " .... lol !! personally if i´d going to post a shit i would post an interesting thing like a Delorian ( back to the future ) hehehehehe...

Minacious i dont know if mean to the metralla video or the next week "offroad" drifts... i think its about the metralla....... wait for summer hehehehehe!!!

I have meet this week to............ HF Turbo... will post next week right??

Well, cya people!!

P.S.: WTF does clueless folk means.... heheheheheheeh... im not joking please somebody explain plz!!! need to learn more english lol

[findleybeast]

looks like you got your work cut out for you with that bike, but I'm sure it'll be a fun time putting it together. BTW good job getting the custom shot up first try without being asked...

[PATo355]

Hey man , hope the work goes well , and there is nothing bad about the Getz apart from being korean , the car actually rocks , its at the par with the euro counterparts .

[bultaco_metralla]

Brembo: first thx about clueless def, maybe tomorrow i post a photo of the Hf with my car in the "what do you have seen today"... but not sure... we are studing a lot... but be sure that im gonna post it this week!! maybe tomorrow or wednesday... dont know lol!!


PATo355: Hey i love my car and i really have fun with it, its my house, im more in my car than at home lol... but you have to know that ( excuse me for the words ) im a fucking Offroad addict without 4x4... you know what i mean... at least i have friends with 4x4's hehehehe....

[bultaco_metralla]

Well, like sloth said in my infancy and favourite movie The Goonies....

HEY YOU GUUUUUYS!!!!

Its all from today.... LOOK THIS FRESH !!!


General information:

Model: Lancia Delta HF Turbo.
Year: 1986

Engine:

Type: 4 cylindres
Soupapes per cylider: 2
Alimentation : gestion intégrale IAW Weber-Marelli
Suralimentation : turbo Garrett T2 (0.85 bar)(air)
Cubic capacity: 1585

Transmisión:

Type: Traction
Gearbox: 5-speed
Theoric speeds for each gear: 55/88/130/172/219

Chasis and Dimensions:

Front suspension: McPherson
Rear suspension: McPherson
Direction: Zip
Front Brakes: disques ventilated
Rear Brakes: disques
Front tire dimensions: ( official ) 165/65 HR 14 ( too small :shock: )
Rear tire dimesions : ( official ) 165/65 HR 14

Our tires dimension : 195/60 R14.... if you put a 165/65 to HF
youre gonna crash sure!!

Dimensions: 3 895 x 1 620 x 1 380

Other specifications

Fuel capacity: 57 L.
Consumption in sport driving: (oficial ) 17 L.
( extra official :D ) more than 20 L.... lol !!! awesome, “Drinks� a lot.


Time to dribble

http://img179.exs.cx/img179/272/89aw.jpg

http://img179.exs.cx/img179/2236/23dx.jpg

http://img179.exs.cx/img179/5249/50ph.jpg

http://img179.exs.cx/img179/4254/45sb.jpg

http://img178.exs.cx/img178/1453/76wc.jpg

http://img178.exs.cx/img178/8141/100cz.jpg

http://img178.exs.cx/img178/319/10ht.jpg

http://img179.exs.cx/img179/3298/95sn.jpg

http://img179.exs.cx/img179/3969/asistentepararedimensionar18pk.jpg


Trust me 8) , this 1.6 engine ROCKS !!!! And the turbo blows awesome!!!

[TT]

This is your friend's car right? In that case, he needs to register and post the pics, this topic will be merged with yours

[bultaco_metralla]

ok, he is doing it now, what do we have to do after register??

[TT]

ok, he is doing it now, what do we have to do after register??

He can just post the pics you posted for him, a new topic like you did ;)

[bultaco_metralla]

ok, will make a new post this afternoon after study session!!!

bye!!

[bultaco_metralla]

Uhm as for vids it is a bit tricky. We don't offer hosting to "normal" memebers actually, so you need to find somebody with a small webspace willing to help you


lol im completely asshole... ive already read video vault informations and permission... hehehe... stupid question lol!!

[cooperluke]

Nice Lancia...
But when you talked about it I thought it was an Integrale.. :(

Despite that, it's a nice car. Not very room for the legs, right? (just saw the pic with the steering wheel)

My dad had a friend who had one, but infortunately crashed it... maybe he still had the 165/65 tires!! :)

[cooperluke]

Eheh.. let me guess, the rear right door isn't the one that came with the car, right? ;)

[bultaco_metralla]

Mudguard risoration finished. check photos at topic start

[bultaco_metralla]

I think the moto will be finished this summer, now i have a little money to spend in expensive things :wink: ... im already sanding ( from "sand" heheheh english its not my point !! ) the chassis with a black&decker and then ill paint it black ( nice song from the Rolling Stones :wink: )...

http://img163.echo.cx/img163/7130/chasisbultaco7dc.th.jpg (http://img163.echo.cx/my.php?image=chasisbultaco7dc.jpg)

Btw im learning to ride with a friends Suzuki Tu250 Superclassic, i love to ride!!

http://img80.echo.cx/img80/9436/tu25024yd.th.jpg (http://img80.echo.cx/my.php?image=tu25024yd.jpg) http://img80.echo.cx/img80/9916/tu25038kx.th.jpg (http://img80.echo.cx/my.php?image=tu25038kx.jpg) http://img80.echo.cx/img80/1677/tu25041hk.th.jpg (http://img80.echo.cx/my.php?image=tu25041hk.jpg)

I love blackandwhite photos heheh !!
http://img80.echo.cx/img80/8131/tu2501copiar9wb.th.jpg (http://img80.echo.cx/my.php?image=tu2501copiar9wb.jpg)


GENERAL INFORMATION

Model: Suzuki TU 250
Year: 2000
Category: Classic

ENGINE AND TRANSMISSION

Displacement: 249.00 ccm (15.19 cubic inches)
Engine type: Single cylinder
Stroke: 4
Power: 17.00 HP (12.4 kW)) @ 8200 RPM
Valves per cylinder: 4
Cooling system: Air
Gearbox: 5-speed

PS: I dont have ever take a scooter or same LOL !!!

[TransAm]

Dont go scaring yourself on the Suzuki! :shock:

[bultaco_metralla]

Why arnt you getting it sand blasted, or glass blasted ?
You will have a much cleaner frame, then you get it powder coated and it will be like it was brand new..... :wink:


mmmm thats what i thought , but the chassis was full of "hard" shit that gasoline and paintbrush couldnt remove... even the sand didnt... BLACK&DECKER POWER !!!

[bultaco_metralla]

Well finally i enjoyed the money with my friends and my Bul will have to wait... maybe in christmast with Noel... LOL !!! And now i have to study for my sptember exams!!! But ive been doing some little things.


First i have move my garage to my grandpas garage!! His house is next to me ( comunicated by a wooden door in the garden ) and they live almost 11 months in Washington DC. Heres a pic of my new work center i took with a cellular phone ( im sorry :oops: )

http://img163.imageshack.us/img163/4736/pict00056dg.th.jpg (http://img163.imageshack.us/my.php?image=pict00056dg.jpg)


Ive been painting the chassis, this shot was taken while painting.
http://img163.imageshack.us/img163/367/suc500013ol.th.jpg (http://img163.imageshack.us/my.php?image=suc500013ol.jpg)

I have completely finished the carburetor. ( well, have to remove those macaroni ( thats how we say in spain )). im very pleased with this work, seems new!
http://img163.imageshack.us/img163/8352/suc500037vf.th.jpg (http://img163.imageshack.us/my.php?image=suc500037vf.jpg) http://img163.imageshack.us/img163/8000/suc500054si.th.jpg (http://img163.imageshack.us/my.php?image=suc500054si.jpg)


Also i have been working with the rims, but still need more hours!!
http://img163.imageshack.us/img163/4483/suc500028yy.th.jpg (http://img163.imageshack.us/my.php?image=suc500028yy.jpg)

Now im working cleaning the cylinder !!!, the good thing is that its already rectified
http://img163.imageshack.us/img163/4485/pict00032ut.th.jpg (http://img163.imageshack.us/my.php?image=pict00032ut.jpg) http://img163.imageshack.us/img163/8794/pict00023ml.th.jpg (http://img163.imageshack.us/my.php?image=pict00023ml.jpg)


And for last i have added a sticker to the front mudguard, do you like ??
http://img163.imageshack.us/img163/448/suc500085cb.th.jpg (http://img163.imageshack.us/my.php?image=suc500085cb.jpg)



My intention was to restore every part and then assemble it, but i have thought that my priority is to know if the Bul works so i think im going to restore those parts that would be complicated to take off, like inside parts, ( electric sistem, air filter carburetor etc..) and things like rims, console, seat etc will be restored after that you have heared his sound :twisted: :twisted: ( hope next year¿?¿¿?¿ arghhhhh !! I need a work to have some money but have to study....!! )

Btw, 3 days ago was my 6 months in JW !! :D :D half a year!!

[bultaco_metralla]

so your grandparents are in my neck of the woods eh?

Lol, do you remember the Washington Sniper?? the supermarket where he killed an FBI Agent, thats the market where my grandparents usually buy !! they live outside, how you say, in the woods, if im not wrong, its richmond, Virginia, but they are 10 mins to washington!!

==================

Ive finished the chassis :twisted: :twisted:
http://img125.imageshack.us/img125/2568/suc500026zh.th.jpg (http://img125.imageshack.us/my.php?image=suc500026zh.jpg) http://img239.imageshack.us/img239/6770/suc500052ry.th.jpg (http://img239.imageshack.us/my.php?image=suc500052ry.jpg)

This is a OH SHIT !!!
http://img239.imageshack.us/img239/7729/suc500062eb.th.jpg (http://img239.imageshack.us/my.php?image=suc500062eb.jpg)

Now im working with the subchassis
before:http://img239.imageshack.us/img239/3271/suc500073cg.th.jpg (http://img239.imageshack.us/my.php?image=suc500073cg.jpg)
after BlackDecker blast :wink:, sand blast and applied my "oxide destroyer".
http://img250.imageshack.us/img250/5338/suc500097ie.th.jpg (http://img250.imageshack.us/my.php?image=suc500097ie.jpg)
Here you can see the efects of my oxide destructor, the white liquid is the reaction to Fosforic Acid, when its dry i have to sand blast again, clean the dust ( consecuence of sand...) and buy a new black spray for paint it!!
http://img250.imageshack.us/img250/4880/suc500109mm.th.jpg (http://img250.imageshack.us/my.php?image=suc500109mm.jpg)

====================

The other day i had some rides with the Suzuki !!!
http://img173.imageshack.us/img173/6676/suc500221li.th.jpg (http://img173.imageshack.us/my.php?image=suc500221li.jpg) http://img173.imageshack.us/img173/4971/suc500061bh.th.jpg (http://img173.imageshack.us/my.php?image=suc500061bh.jpg)

A photoshop image :D :D I like!!
http://img173.imageshack.us/img173/1921/gogoeasyrider3cn.th.jpg (http://img173.imageshack.us/my.php?image=gogoeasyrider3cn.jpg)

Now im shaved, no more easy rider look :twisted: :twisted:

[bultaco_metralla]

hehehehe thx Goodduck !! lets see how it countinues!!!!!

[bultaco_metralla]

Well, seems im doing more in this summer than in a year LOL ¡!, anyway, heres another update.

I have finished the subchassis, so i think tomorrow i will assemble all the chassis!!
Subchassis BLASTED and ready for a paint job!!
http://img155.imageshack.us/img155/8030/suc500095sk.th.jpg (http://img155.imageshack.us/my.php?image=suc500095sk.jpg)
While painting !!
http://img226.imageshack.us/img226/9762/suc500097bm.th.jpg (http://img226.imageshack.us/my.php?image=suc500097bm.jpg)
And finished !!
http://img226.imageshack.us/img226/226/suc500115ks.th.jpg (http://img226.imageshack.us/my.php?image=suc500115ks.jpg)


Also, Ive been working more on the front wheel
This is the left side:
http://img226.imageshack.us/img226/3205/suc500122zu.th.jpg (http://img226.imageshack.us/my.php?image=suc500122zu.jpg)
Before/after shots
http://img226.imageshack.us/img226/1572/suc500116ye.th.jpg (http://img226.imageshack.us/my.php?image=suc500116ye.jpg) http://img226.imageshack.us/img226/9534/suc500151mg.th.jpg (http://img226.imageshack.us/my.php?image=suc500151mg.jpg)
http://img226.imageshack.us/img226/7752/suc500132im.th.jpg (http://img226.imageshack.us/my.php?image=suc500132im.jpg) http://img226.imageshack.us/img226/6853/suc500168pu.th.jpg (http://img226.imageshack.us/my.php?image=suc500168pu.jpg)

The other day i went to a old ( very old ) motorcycle shop and I had the lucky to find JOINTS!! ( not of weed LOL ! )
http://img226.imageshack.us/img226/4898/suc500135uo.th.jpg (http://img226.imageshack.us/my.php?image=suc500135uo.jpg)

And for last, finally my red seat !!
http://img226.imageshack.us/img226/7569/suc500123qi.th.jpg (http://img226.imageshack.us/my.php?image=suc500123qi.jpg)


Btw all those parts on chasis that keeps a little of black paint its cause that parts are very well “sticked” ( dont know how to say correctly) and the Black&decker POWA couldnt with it ( well if im doing 5 mins yes....).

[bultaco_metralla]

Another one update.

http://img420.imageshack.us/img420/3425/suc500023zc.th.jpg (http://img420.imageshack.us/my.php?image=suc500023zc.jpg) Finally !!!

Ive been working a lot with the front brake.... see this!!
before
http://img408.imageshack.us/img408/73/suc500386up.th.jpg (http://img408.imageshack.us/my.php?image=suc500386up.jpg) http://img408.imageshack.us/img408/4706/suc500396ss.th.jpg (http://img408.imageshack.us/my.php?image=suc500396ss.jpg) http://img408.imageshack.us/img408/7918/suc500416hj.th.jpg (http://img408.imageshack.us/my.php?image=suc500416hj.jpg) http://img408.imageshack.us/img408/7821/suc500435rf.th.jpg (http://img408.imageshack.us/my.php?image=suc500435rf.jpg)
http://img408.imageshack.us/img408/7710/suc500031tq.th.jpg (http://img408.imageshack.us/my.php?image=suc500031tq.jpg) http://img408.imageshack.us/img408/677/suc500046tp.th.jpg (http://img408.imageshack.us/my.php?image=suc500046tp.jpg)
http://img408.imageshack.us/img408/4449/suc500077lu.th.jpg (http://img408.imageshack.us/my.php?image=suc500077lu.jpg) http://img408.imageshack.us/img408/4507/suc500084vu.th.jpg (http://img408.imageshack.us/my.php?image=suc500084vu.jpg)

while cleaning
http://img408.imageshack.us/img408/8904/suc500028lu.th.jpg (http://img408.imageshack.us/my.php?image=suc500028lu.jpg)

And the final result!!
http://img408.imageshack.us/img408/7347/suc500091wu.th.jpg (http://img408.imageshack.us/my.php?image=suc500091wu.jpg)


The next job is the rear brake, its in much better conditions than front brake, see it:
http://img408.imageshack.us/img408/7568/suc500102sx.th.jpg (http://img408.imageshack.us/my.php?image=suc500102sx.jpg) http://img408.imageshack.us/img408/5690/suc500115yn.th.jpg (http://img408.imageshack.us/my.php?image=suc500115yn.jpg)

hope you enjoyed! i did it :D :D

[bultaco_metralla]

looks like its coming along really nicely. the frame looks great. its gonna be really col when its done. thanks a lot for te updates... i love these topics

Heheheh thx, i usually think of you when making the updates!!

My mum has a Mobilette since she was young - 30 years at least. We have it at the backyard... covered with dust. If you want to restore it after the Metralla... you know where can you find me! :P
BTW, what about the Meriva I see in some of the pics? what a gorgeous car!! :D

I will love to go Barcelona, meet you and come back with that mobilette!!! Hope to finish the Metralla soon to ride it and then go to take that mobilette.
I also have in my waiting list a ducati 50cc around 30 years also of the mother of a friend

Hehehehe i thought i told you something about the Meriva, my grandparents live in EEUU and its their car when they have sometime in spain, its an automatic 1.6 gasoline, the gear boz is really slow :? but its very easy to drive!! Yours is diesel right??

[bultaco_metralla]

Well, hi again, ive been working a lot with the bultaco but dont have posted the updates ( exams, too many hours of class…) in fact i dont have been visiting site at least for a month… so heres what i call a huge update LOL ¡!! Hope you enjoy!!!


:arrow: FRONT BRAKES FINISHED.

http://img460.imageshack.us/img460/4264/asistentepararedimensionar19ys.th.jpg (http://img460.imageshack.us/my.php?image=asistentepararedimensionar19ys.jpg)

http://img460.imageshack.us/img460/891/asistentepararedimensionar29ep.th.jpg (http://img460.imageshack.us/my.php?image=asistentepararedimensionar29ep.jpg)


:arrow: REAR BRAKES.

http://img481.imageshack.us/img481/6522/asistentepararedimensionar51rd.th.jpg (http://img481.imageshack.us/my.php?image=asistentepararedimensionar51rd.jpg)

http://img454.imageshack.us/img454/7413/asistentepararedimensionar63tb.th.jpg (http://img454.imageshack.us/my.php?image=asistentepararedimensionar63tb.jpg)

http://img489.imageshack.us/img489/2127/asistentepararedimensionar78xa.th.jpg (http://img489.imageshack.us/my.php?image=asistentepararedimensionar78xa.jpg)

http://img489.imageshack.us/img489/2599/asistentepararedimensionar86cv.th.jpg (http://img489.imageshack.us/my.php?image=asistentepararedimensionar86cv.jpg)

a detail of the screws, (almost all of the moto)
http://img372.imageshack.us/img372/6756/asistentepararedimensionar40xw.th.jpg (http://img372.imageshack.us/my.php?image=asistentepararedimensionar40xw.jpg)

http://img460.imageshack.us/img460/4120/asistentepararedimensionar37al.th.jpg (http://img460.imageshack.us/my.php?image=asistentepararedimensionar37al.jpg)

:arrow: GEARBOX ( dont have opened it completely, it would be crazy, had to take to a ristoration shop)

the new joints
http://img454.imageshack.us/img454/710/asistentepararedimensionar91sf.th.jpg (http://img454.imageshack.us/my.php?image=asistentepararedimensionar91sf.jpg)

A nice detail, the bultaco hand!
http://img454.imageshack.us/img454/200/asistentepararedimensionar108y.th.jpg (http://img454.imageshack.us/my.php?image=asistentepararedimensionar108y.jpg)

http://img20.imageshack.us/img20/8463/asistentepararedimensionar115x.th.jpg (http://img20.imageshack.us/my.php?image=asistentepararedimensionar115x.jpg)

http://img478.imageshack.us/img478/4854/asistentepararedimensionar128x.th.jpg (http://img478.imageshack.us/my.php?image=asistentepararedimensionar128x.jpg)


:arrow: The other MUDGUARD.

http://img473.imageshack.us/img473/2315/asistentepararedimensionar131g.th.jpg (http://img473.imageshack.us/my.php?image=asistentepararedimensionar131g.jpg)

http://img473.imageshack.us/img473/7880/asistentepararedimensionar143q.th.jpg (http://img473.imageshack.us/my.php?image=asistentepararedimensionar143q.jpg)

:arrow: REAR TRANSMISSION ( dont have taken before photos... shit! )

http://img367.imageshack.us/img367/6131/asistentepararedimensionar168p.th.jpg (http://img367.imageshack.us/my.php?image=asistentepararedimensionar168p.jpg)

http://img481.imageshack.us/img481/1898/asistentepararedimensionar175b.th.jpg (http://img481.imageshack.us/my.php?image=asistentepararedimensionar175b.jpg)

detail of the hole for the chain lube
http://img354.imageshack.us/img354/452/asistentepararedimensionar150z.th.jpg (http://img354.imageshack.us/my.php?image=asistentepararedimensionar150z.jpg)

:arrow: REAR AXIS COMPLETED

http://img364.imageshack.us/img364/456/asistentepararedimensionar188s.th.jpg (http://img364.imageshack.us/my.php?image=asistentepararedimensionar188s.jpg)

http://img489.imageshack.us/img489/4305/asistentepararedimensionar194f.th.jpg (http://img489.imageshack.us/my.php?image=asistentepararedimensionar194f.jpg)

http://img489.imageshack.us/img489/5978/asistentepararedimensionar202q.th.jpg (http://img489.imageshack.us/my.php?image=asistentepararedimensionar202q.jpg)

:arrow: FRONT AXIS and speedmeter.

http://img360.imageshack.us/img360/4403/asistentepararedimensionar214i.th.jpg (http://img360.imageshack.us/my.php?image=asistentepararedimensionar214i.jpg)

http://img360.imageshack.us/img360/5959/asistentepararedimensionar223s.th.jpg (http://img360.imageshack.us/my.php?image=asistentepararedimensionar223s.jpg)

http://img470.imageshack.us/img470/244/asistentepararedimensionar231e.th.jpg (http://img470.imageshack.us/my.php?image=asistentepararedimensionar231e.jpg)

http://img470.imageshack.us/img470/9623/asistentepararedimensionar242a.th.jpg (http://img470.imageshack.us/my.php?image=asistentepararedimensionar242a.jpg)

http://img470.imageshack.us/img470/5314/asistentepararedimensionar258m.th.jpg (http://img470.imageshack.us/my.php?image=asistentepararedimensionar258m.jpg)

Now im working in the fuel tank.
:arrow: FUEL TANK.

http://img470.imageshack.us/img470/9975/asistentepararedimensionar263o.th.jpg (http://img470.imageshack.us/my.php?image=asistentepararedimensionar263o.jpg)

http://img20.imageshack.us/img20/7493/asistentepararedimensionar272t.th.jpg (http://img20.imageshack.us/my.php?image=asistentepararedimensionar272t.jpg)

http://img20.imageshack.us/img20/8259/asistentepararedimensionar289x.th.jpg (http://img20.imageshack.us/my.php?image=asistentepararedimensionar289x.jpg)

http://img20.imageshack.us/img20/7290/asistentepararedimensionar296w.th.jpg (http://img20.imageshack.us/my.php?image=asistentepararedimensionar296w.jpg)

http://img379.imageshack.us/img379/1690/asistentepararedimensionar305v.th.jpg (http://img379.imageshack.us/my.php?image=asistentepararedimensionar305v.jpg)

upload this pics was really boring !!! Will continue !!!

[antonioledesma]

at last you posted something Adolfo!
your school must be a pain. I didn't read any post from you in the last few months

btw, the bultaco is coming nicely :D

[ARMAN]

where the hell you have been Bultaco??? :) when it will be ready?

[bultaco_metralla]

well i need some money to take the gearbox to the ristoration shop, i have to rebuild the electric system ( pfffffff, at least i have bought the owners manual and the build parts book ), repair the air filter, and the console ( speed rpm...) and some more little details... the fact is i dont have a job for gain money, i have too many hours of class so i cant get a job... , my birthday is in may so i think i could get money then, maybe in summer or after summer, today ive finished the fuel tank, only have to paint it !! will post soon!

[davide]

wow, that's alot of work!

Looking forward to see it when it's finished!
Keep the good work up!

[bultaco_metralla]

time for fuel tank!! Dont have painted it yet, im not sure with the colours, i have the idea ( as youll see in a picture later ) but dont know what colours, HELP MEEE Ideas will be very much appreciated!!

:arrow: First Sand!

My friend "Paker" showing me the technic!!

http://img322.imageshack.us/img322/4525/asistentepararedimensionar32hk.th.jpg (http://img322.imageshack.us/my.php?image=asistentepararedimensionar32hk.jpg)

There were three kind of colours... many hours sanding... :|

http://img308.imageshack.us/img308/4687/asistentepararedimensionar26lc.th.jpg (http://img308.imageshack.us/my.php?image=asistentepararedimensionar26lc.jpg)

Sanding time

http://img360.imageshack.us/img360/5524/asistentepararedimensionar44oz.th.jpg (http://img360.imageshack.us/my.php?image=asistentepararedimensionar44oz.jpg)

http://img360.imageshack.us/img360/161/asistentepararedimensionar53us.th.jpg (http://img360.imageshack.us/my.php?image=asistentepararedimensionar53us.jpg)

http://img322.imageshack.us/img322/9092/asistentepararedimensionar67vi.th.jpg (http://img322.imageshack.us/my.php?image=asistentepararedimensionar67vi.jpg)

:arrow: FIBERGLASS
After sand have to cover little pores, little scratches...

http://img322.imageshack.us/img322/3148/asistentepararedimensionar70rq.th.jpg (http://img322.imageshack.us/my.php?image=asistentepararedimensionar70rq.jpg)

completely "fiberglassed" :)

http://img123.imageshack.us/img123/5039/asistentepararedimensionar80wy.th.jpg (http://img123.imageshack.us/my.php?image=asistentepararedimensionar80wy.jpg)

Fiberglass sanded!!

http://img300.imageshack.us/img300/6326/asistentepararedimensionar13qw.th.jpg (http://img300.imageshack.us/my.php?image=asistentepararedimensionar13qw.jpg)

and finally
:arrow: THE BIG PORE ( you can see a picture in the update before these one)

http://img115.imageshack.us/img115/865/asistentepararedimensionar21wu.th.jpg (http://img115.imageshack.us/my.php?image=asistentepararedimensionar21wu.jpg)

sand again, but carefully, and theres no more pore and the tank is almost new

http://img115.imageshack.us/img115/246/asistentepararedimensionar36qf.th.jpg (http://img115.imageshack.us/my.php?image=asistentepararedimensionar36qf.jpg)

The way im going to paint, 2 colours, one the tank and the other the stripes. DO YOU HAVE AN IDEA !!! TELL ME!!

http://img115.imageshack.us/img115/9591/asistentepararedimensionar46za.th.jpg (http://img115.imageshack.us/my.php?image=asistentepararedimensionar46za.jpg)


Well, now im working in the side covers, i was sanding and suddenly realized what was the strange word under the paint layer... COOOOOL !!! :mrgreen:

http://img430.imageshack.us/img430/3743/coversidememorial1ta.th.jpg (http://img430.imageshack.us/my.php?image=coversidememorial1ta.jpg)

Also you can see a little bit of "light blue". that was a colour test, obviously was fail!!


Enjoy !!

Edit: Anyone having problems uploading with imageshack ?? its insane for me try to upload 20 times a picture!! :bad-words:

[bultaco_metralla]

well I PMed some admins to see if we could have a new subforum in this section for our cars videos or stunts... but its thought that there not going to be many videos for make a new subforum... Anyway heres my car video!!! Its 80mb, low res, cause high res goes to 200 mb, and also as usual my cpu dont record the music as I preapred with my studio program, its 0.1 or 0.2 secs slow or fast with the video... Hope you like it !!

BTW, anyway saw my last post and thought about fuel tank colors ?? PLZ HELP!!


http://rapidshare.de/files/23577704/Sin_t_tulo.mpg.html